SIGELEI MINI Zmax is a variable Voltage/Wattage mod that can be used with one 18350 battery.
It can deliver 3.0 to 6.0 Volts or 3.0 to 15.0 Watts.
Mini Zmax Kit Contents:
1 x Nini Zmax Body
2 x 18350 Protected Lithiume Battery
1 x Vivi Nova 3.5 Clearomizer
1 x Lithium Battery Charger
1 x Instruction Manual
-Material: 304 stainless steel/aluminum (for the colorful ones)
-Thread: 510 and ego thread
-Weight: 107g (stainless steel)/67g (aluminum)
-3.0 to 6.0 Volts, in 0.1V increments
-3.0 to 15.0 Watt, in 0.5W increments
Operation of ZMAX:
-Press 5 times continuously to turn on/off the mod.
-Press 3 times to browse the menu when the screen has shut down.
-Choose the menu, wait 2 seconds to get into it and set the item;
2 seconds are needed to get it set and another 2 seconds are required to exit the menu.
-The menu always starts from ‘OUT ON/OFF’.
The menu has 8 different functions:
1. OUT ON/OFF
Disabling the button
The device can be disabled to prevent from unwanted firing by selecting ‘
OUT OFF’. When ‘OUT ON’ is selected then the device will work normally and atomizer will fire.
2. VOLTAGE UP
To increase the Voltage from 3.0V to 6.0V in 0.1 Volt increments,
or power from 3.0W to 15.0W in 0.5 Watt increments.
*Select Voltage or Wattage setting in menu 7.
3. VOLTAGE DOWN
To reduce the Voltage from 6.0V to 3.0V in 0.1 Volt decrements,
or power from 15.0W to 3.0W in 0.5 Watt decrements. Select Voltage or Wattage setting in menu 7.
* Select Voltage or Wattage setting in menu 7.
4. BATTER VOLTAGE
Battery level indicator
To check the battery voltage. A fully charged battery will have 4.2V.
We recommend charging the battery when it falls to 3.3V.
Zmax will switch off automatically when the battery level reaches 3.1V.
5. LCD DISPLAY
To select what item to be displayed.
Battery: to display the battery voltage
Voltage: to display the output voltage
Resistance: to display the resistance of atomizer
6. LCD ON/OFF
Switch LCD on/off
When ‘ON’ is selected, the LCD will display your settings when the button is pressed.
When ‘OFF’ is selected, the LCD will not display your settings when the button is pressed.
7. POWER VOLTAGE
Select VV or VW
To choose between variable voltage and variable wattage.
Select RMS or MEAN voltage.
1. Clean the thread after using in case of rusting and corrosion.
2. Do not reverse the battery in the tube.
3. Remember to turn off Zmax when not using.
4. Do not use the protected batteries.
5. Had better not put Zmax in your pocket. A hanger is recommended.