Vamo V3- Detachable VV and VW Mod
Tips: The new Vamo V3 variable voltage / watt mod is updated from the normal Vamo V2 with new design and function. With the new OLED screen, you can have a better view than Vamo V2. There are 2 different tubes with Vaomo V3, which you choose to use 1pc 18650 battery, 2pcs 18350 batteries, or only 1pc 18350 battery.
This Vamo body with variable voltage and variable watts it is a new well designed mod . It's special feature is that it is detachable and it can work with a 18350 battery ( having mounted just a mini segment ) or two 18350 batteries ( having mounted two mini segments ) . It can also work with a 18650 battery ( two mini segments ) .
The output voltage can be adjusted from 3V to 6V in steps of 0.1V and the working power from 3 Watts to 15 Watts in steps of 0.5 Watts.
It is compatible with all clearomizers , cartomizers and atomizers with ego or 510 thread because it has ego/510 thread . ( ce4 clearomizers , Vivi Nova , DCT510 , Kanger ProTank etc .
Technical specifications :
Weight of device: 135g
Outer Diameter: 22mm
Length with Two 18350 batteries: 136mm
Length with One 18350 battery : 105mm
Batteries capacity : 900/1800 mAh
Compatible Batteries: 18350 / 18650
Variable Voltage: 3V-6V with 0.1V
Variable Wattage: 3W-15W with 1 W
Output current : 0-2.5A
Vamo V3 has dual mode setting :
VV Mode : You can adjust voltage from 3.0 to 6.0 Volts in 0.1 volt increments.
VW Mode : You can adjust Wattage from 3.0 to 15 Watts in 0.5 Watt increments.
User settings :
Turn On or Off:
Click the big Power button 5 times within 2 seconds (on/off) to turn on / off the device .
Switch between VV and VW:
To switch power mode from volts to watts. press and hold (+) and (-) at the same time for 3 seconds. (v for volts, w for Watts).
Tap the (+) or (-) buttons to raise or lower output voltage (in 0.1 volt increments).
Tap the (+) or (-) buttons to raise or lower output wattage (in 0.5 watt increments).
Press and hold the (+) button for 3 seconds (resistance is displayed in ohms) and the you will see on the LCD display the resistance of atomizer .
Battery voltage check:
Press and hold the (-) button for 3 seconds to check actual battery voltage.
To switch between the two mods you need to hold down the two mini buttons for 3 seconds