Shopping Cart

Item description


VAMO V5 Starter Kit Detachable VV and VW Mod

The Vamo V5.0
Is another slight upgrade to the generations of a great cost efficient APV mod unit. While it may appear to have the similar characteristics of its previous Vamo versions, it utilizes all of the best combinations of generations into one unit. One can say this is the hyrid of all Vamos as it's constructed with the V2 body shape, V3 OLED screen display with upgraded chipset and as wel as the V3 top cap design which has the ability to unscrew for a wider range of attachments to use.

The first great feature is that the V5, along with it's previous V3/V4 versions, is the RMS mode exclusively active, while maintaining it's common ground variable voltage / wattage mode options. This V5 now features better metal buttons, a different battery spring and a new raised 510 connection. In variable voltage mode, the device can go from 3v to 6v in .1v incriments. In variable wattage mode, the device can go from 3.0w to 15w in .5w incriments.

The Vamo V5 
Has the ability to measure and display the resistance of your atomizer, cartomizer, or tank. All the information shown via a OLED screen.  The device takes a single 18650 size battery or it can also be used in its smaller setting with a 18350 as well by removing the bottom section tube.

Vamo V5  instructions:

 

1: Output Voltage from 3.0V to 6.0V, adjusting the working volt +- 0.1V by pressing + and - buttons.
2: Keep pressing the + button more than 3 sec, OLED screen displays the present working resistance.
3: Keep pressing the - button more than 3 sec, the OLED screen showing the battery volt.
4: 5X click, OLED screen displays " on " or " off ".
5: Output power 3W~15W.
6: Max Armature Current 5A.
7: on/off Mode allows you to shut the unit off completely.
8: Reverse battery protection keeps circuit safe if the battery is installed backward.
9: Battery Monitoring shuts the unit off once battery has reached end of charge.
10: Amperage limiting system protects against over current situations.
11: Thermal Monitoring shuts the device off if it detects a high temperature condition.
12: Fit atomizers with resistance 1.5~5.0ohm.
13: Time limit protection function, it will shut down with more than 10s each puff.
14: OLED screen displays " LO-Ω" if resistance lower than 1.2ohm, "LO-V" if short circuit.

See more product details
Price: $58.95
Product #: 92105068103205098
Category : Starter Kits
Share your opinion!

Manufacturer : Vamo Model Number : HBVAMO-02


Product Details

VAMO V5 Starter Kit Detachable VV and VW Mod

The Vamo V5.0
Is another slight upgrade to the generations of a great cost efficient APV mod unit. While it may appear to have the similar characteristics of its previous Vamo versions, it utilizes all of the best combinations of generations into one unit. One can say this is the hyrid of all Vamos as it's constructed with the V2 body shape, V3 OLED screen display with upgraded chipset and as wel as the V3 top cap design which has the ability to unscrew for a wider range of attachments to use.

The first great feature is that the V5, along with it's previous V3/V4 versions, is the RMS mode exclusively active, while maintaining it's common ground variable voltage / wattage mode options. This V5 now features better metal buttons, a different battery spring and a new raised 510 connection. In variable voltage mode, the device can go from 3v to 6v in .1v incriments. In variable wattage mode, the device can go from 3.0w to 15w in .5w incriments.

The Vamo V5 
Has the ability to measure and display the resistance of your atomizer, cartomizer, or tank. All the information shown via a OLED screen.  The device takes a single 18650 size battery or it can also be used in its smaller setting with a 18350 as well by removing the bottom section tube.

Vamo V5  instructions:

 

1: Output Voltage from 3.0V to 6.0V, adjusting the working volt +- 0.1V by pressing + and - buttons.
2: Keep pressing the + button more than 3 sec, OLED screen displays the present working resistance.
3: Keep pressing the - button more than 3 sec, the OLED screen showing the battery volt.
4: 5X click, OLED screen displays " on " or " off ".
5: Output power 3W~15W.
6: Max Armature Current 5A.
7: on/off Mode allows you to shut the unit off completely.
8: Reverse battery protection keeps circuit safe if the battery is installed backward.
9: Battery Monitoring shuts the unit off once battery has reached end of charge.
10: Amperage limiting system protects against over current situations.
11: Thermal Monitoring shuts the device off if it detects a high temperature condition.
12: Fit atomizers with resistance 1.5~5.0ohm.
13: Time limit protection function, it will shut down with more than 10s each puff.
14: OLED screen displays " LO-Ω" if resistance lower than 1.2ohm, "LO-V" if short circuit.

This item hasn't been review yet

Categories

Need Some help? Contact us or Call +1 305.398.3232

Address

  • 1048 NW 1st court
    Hallandale, FL 33009

  • +1 (954) 358-9095

 

© Copyright 2019 esmokespot.com Powered by CraanDesigns

To
Top
Visit Esmokespot.com on ShopMania

esmokespot is an Upfront Merchant on TheFind. Click for info.

Merchant Services

 

The statements and Vaporizers shown on this website have not been evaluated by the US Food and Drug Administration (FDA). These Vaporizers are not designed to diagnose, cure, prevent, or treat any disease. Before using a vaporizer, please consult with a licensed health care provider. If you use a Vaporizer, you do so at your own risk. Inhalation is inadvisable and may potentially be harmful. Any comments from user submitted reviews found on this website are related to the users own personal experiences, and are not endorsed, reviewed, or necessarily shared by us or its affiliates. Vaporizing does not necessarily eliminate any and all toxins found in vaporized substances, so much care should be taken prior to use. You must be 18 or older and respect all local laws to purchase a Vaporizer. By using esmokespot.com, you acknowledge and agree to abide by our Terms of Use page before making any purchase on this website.

Create An Event

Event Info

To begin, please enter the date of the event

Time Information

Date format MM/dd/yyyy
Time format hh:mm:ss

Pricing Information

There will be a handling charge on top of the ticket sale of $8.00

Address Information

Where would the location of the event?

Address Information Cont

Contact Information

Event Description

No HTML code, any HTML code will be strip from text.

Event Confirmation

Please review your event informaiton before saving